Page 1 of 1
Grease seal dimensions for 1 1/16" x 1 1/16" bearings?
Posted: Tue Aug 14, 2007 8:52 am
by dilbert
Anyone know the dimensions (ID and OD) for a grease seal for a trailer that has 1 1/16" x 1 1/16" bearings?
RE:Grease seal dimensions for 1 1/16" x 1 1/16" bearings?
Posted: Tue Aug 14, 2007 9:24 am
by jmay
I don't belevie there is a standard size. EZLoader has a parts office in Spokane, I know they can run a vin and give you exact OEM replacements
RE:Grease seal dimensions for 1 1/16" x 1 1/16" bearings?
Posted: Tue Aug 14, 2007 9:47 am
by dilbert
I was afraid of that. When you buy the complete bearing sets they never list the size of the grease seal, just the bearings and cups (L44649 and L44610 for mine). So, without having my VIN handy, how would I know if the set would work? I guess I could just bring along my old seal and compare it. It seems that last time I replaced the bearings I just bought a 1 1/16 set and they worked out fine.
RE:Grease seal dimensions for 1 1/16" x 1 1/16" bearings?
Posted: Tue Aug 14, 2007 10:53 am
by jmay
I found this chart it might help at
http://www.etrailer.com/c-bearings.htm
Replacement Bearings Race
Part No. Description I.D. Part No. O.D.
L44649 Inner/Outer for BTR, Outer for #84 Spindles 1.063" L44610 1.980"
Outer Bearing Inner Bearing Seal Seal I.D.
L44649 L44649 10-60 1.500"
L44649 L68149 10-19 1.719"
RE:Grease seal dimensions for 1 1/16" x 1 1/16" bearings?
Posted: Tue Aug 14, 2007 11:01 am
by dilbert
Yeah, that's basically what I've been finding. The OD is 1.980" and the ID is either 1.25" or 1.50"... looking at my old one I believe it's 1.25". Thanks for the help.