Help with Lowrance Elite 5 ti

Talk about the gear that makes your fishing day.
Post Reply
User avatar
The Quadfather
Rear Admiral One Star
Posts: 3788
Joined: Tue May 08, 2007 2:27 pm
Location: Carkeek Park, North Seattle
Contact:

Help with Lowrance Elite 5 ti

Post by The Quadfather » Sun Aug 05, 2018 8:39 pm

OK, so I was running my (new to me) Lowrance Elite 5 ti sonar, on the lake today. This unit I have used about 5x, and it’s always been solid.

Today, I ran my fingers across the screen to dust it off a bit.
Forgot the screen is touch controlled like a cell phone.
Oops! Screen went to black, nothing visible. When I turn unit on/off, it will do the initial light up showing Lowrance logo,, then poof! Black screen, although I know unit is still on because if I touch the black screen it will beep as though active.

Any Lowrance users care to comment?
G-man, I think you run a Lowrance?

User avatar
G-Man
Admiral
Posts: 2682
Joined: Mon Jul 14, 2008 9:01 am
Location: Bellevue, WA

Re: Help with Lowrance Elite 5 ti

Post by G-Man » Sun Aug 05, 2018 9:43 pm

If I was to hazard a guess, I'd say you inadvertently dimmed the screen to its lowest level. Throw a blanket over you and the unit and have a look. Alternately, after you turn on the unit, tap the power button (don't press and hold) and you can step through the preset backlight levels.

User avatar
The Quadfather
Rear Admiral One Star
Posts: 3788
Joined: Tue May 08, 2007 2:27 pm
Location: Carkeek Park, North Seattle
Contact:

Re: Help with Lowrance Elite 5 ti

Post by The Quadfather » Mon Aug 06, 2018 6:43 am

Good idea, blanket tonight.

At one point I thought I saw a faint image, but wasn’t sure (while in heavy sunlight)

User avatar
kodacachers
Lieutenant
Posts: 250
Joined: Tue Jul 08, 2008 2:18 pm
Location: Bellevue

Re: Help with Lowrance Elite 5 ti

Post by kodacachers » Mon Aug 06, 2018 2:28 pm

I don't know if its the same with yours but I had the same thing on my new HDS and learned that repeatedly pushing the power button cycles through the brightness.

User avatar
The Quadfather
Rear Admiral One Star
Posts: 3788
Joined: Tue May 08, 2007 2:27 pm
Location: Carkeek Park, North Seattle
Contact:

Re: Help with Lowrance Elite 5 ti

Post by The Quadfather » Mon Aug 06, 2018 2:30 pm

Kodcachers,
Can you clarify? You learned what?

Edit: Sorry, re-read your post. I gotcha.

User avatar
kodacachers
Lieutenant
Posts: 250
Joined: Tue Jul 08, 2008 2:18 pm
Location: Bellevue

Re: Help with Lowrance Elite 5 ti

Post by kodacachers » Mon Aug 06, 2018 2:38 pm

I learned that if you press the power on button several times on the HDS unit it cycles through all the brightness settings, so if the unit is dimmed to its lowest setting, by pressing that button eventually it will come back to full brightness. Pretty handy.

User avatar
G-Man
Admiral
Posts: 2682
Joined: Mon Jul 14, 2008 9:01 am
Location: Bellevue, WA

Re: Help with Lowrance Elite 5 ti

Post by G-Man » Mon Aug 06, 2018 5:58 pm

Yes, the key to remember is not to hold down the power button, just a quick press and release to let you cycle through the backlight levels one at a time.

User avatar
The Quadfather
Rear Admiral One Star
Posts: 3788
Joined: Tue May 08, 2007 2:27 pm
Location: Carkeek Park, North Seattle
Contact:

Re: Help with Lowrance Elite 5 ti

Post by The Quadfather » Mon Aug 06, 2018 6:09 pm

Well, blanket party with the Lowrance is over.

Thanks guys! That was the answer to the issue. Powered up, then tap, tap, tap, on power key.
Lights back on. :cheers: :cheers:

Post Reply