The trolling motor I'm using is a Minn Kota Endura 46 pound thrust electric. It has 5 speeds and it draws amperage at different rates for each speed. Does anyone have any idea of the amps being drawn off the battery at each of the 5 speeds? I have an email in to Minn Kota but I haven't heard from them yet.
Thanks Ahead,
Trolling Motor Amp Draw
- Lotech Joe
- Commodore
- Posts: 1139
- Joined: Sun Apr 29, 2007 6:19 am
- Location: Liberty Lake, Washington
Trolling Motor Amp Draw
Where you go is less important than how you get there.
Fish With A Friend
Lotech Joe
Fish With A Friend
Lotech Joe
- FishingFool
- Commodore
- Posts: 902
- Joined: Thu Jun 28, 2007 8:17 pm
- Location: Kent
RE:Trolling Motor Amp Draw
Dont know about the lower settings, but general rule for the 12v is, whatever thrust is it, is the amp.
So at max speed, the draw should be about 46 amps.
So at max speed, the draw should be about 46 amps.
- Lotech Joe
- Commodore
- Posts: 1139
- Joined: Sun Apr 29, 2007 6:19 am
- Location: Liberty Lake, Washington
RE:Trolling Motor Amp Draw
That'd be easy enough to remember.FishingFool wrote:Dont know about the lower settings, but general rule for the 12v is, whatever thrust is it, is the amp.
So at max speed, the draw should be about 46 amps.

Where you go is less important than how you get there.
Fish With A Friend
Lotech Joe
Fish With A Friend
Lotech Joe
RE:Trolling Motor Amp Draw
Joe,
Here is a chart someone put together for a 30amp max draw. Not specific to the 46, but might be ballpark for your motor. First column is speed setting (1-5), second column is amp draw.
Here is a chart someone put together for a 30amp max draw. Not specific to the 46, but might be ballpark for your motor. First column is speed setting (1-5), second column is amp draw.
- Attachments
-
- Picture_4.png (14.78 KiB) Viewed 10534 times
Last edited by BentRod on Wed May 18, 2011 5:38 pm, edited 1 time in total.
- Lotech Joe
- Commodore
- Posts: 1139
- Joined: Sun Apr 29, 2007 6:19 am
- Location: Liberty Lake, Washington
RE:Trolling Motor Amp Draw
This just in from MinnKota in reference to the amp draw on a 5 speed Endura.
Joe,
The amp draw at the different speeds are listed in order. 8A, 12A, 16A, 24A, and 42 amps on high.
Joe,
The amp draw at the different speeds are listed in order. 8A, 12A, 16A, 24A, and 42 amps on high.
Where you go is less important than how you get there.
Fish With A Friend
Lotech Joe
Fish With A Friend
Lotech Joe