Looking for a distributor cap

Talk about your boats, trailers, and boating specific topics here. Sponsored by Life Proof Boats.
Post Reply
User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Looking for a distributor cap

Post by GoingtoFish » Mon Jul 25, 2016 2:34 pm

I was given a 1976 15ft Fiberform. The boat itself is in great condition but I need to do a little repair on the motor. It is a Merc 650 65hp 3 cylinder outboard. I am in need of a distributor cap. Part number 393-4606A2. Like the one pictured.
IMG_20140108_181232393[1].jpg
I'm hoping someone on this forum has one lying around or knows where I can get one. The ones I have found on-line are $270+. I did find a used one on Ebay for $100 and another for $150. Hoping that I can get one a bit cheaper.

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5407
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Looking for a distributor cap

Post by Bodofish » Mon Jul 25, 2016 5:01 pm

Sure it needs replacing? With prices like those, I can't believe they changed too often.......
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Re: Looking for a distributor cap

Post by GoingtoFish » Mon Jul 25, 2016 6:03 pm

Bodofish wrote:Sure it needs replacing? With prices like those, I can't believe they changed too often.......
Yup, it's missing. The previous owner took it off because it was cracked and threw it away.

User avatar
hewesfisher
Admiral
Posts: 1886
Joined: Sat Apr 28, 2007 8:20 am
Location: Spangle, WA

Re: Looking for a distributor cap

Post by hewesfisher » Tue Jul 26, 2016 8:30 am

I may be able to help source the part, but need to confirm year of engine, engine serial number would be most helpful.
Phil

'09 Hewescraft 20' ProV
150hp Merc Optimax
8hp Merc 4-stroke
Raymarine DS600X HD Sounder
Raymarine a78 MultiFunctionDisplay
Raymarine DownVision
Raymarine SideVision
Baystar Hydraulic Steering
Trollmaster Pro II
Traxstech Fishing System
MotorGuide 75# Thrust Wireless Bow Mount

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5407
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Looking for a distributor cap

Post by Bodofish » Tue Jul 26, 2016 8:54 am

GoingtoFish wrote:
Bodofish wrote:Sure it needs replacing? With prices like those, I can't believe they changed too often.......
Yup, it's missing. The previous owner took it off because it was cracked and threw it away.
Ouch! All can say is old Merc's had some crazy ignition schemes back then. I was able to find some used ones around a C note but most are a buck fifty on up to MSRP of $387.XX. Sweet spot seems to be right around $220. Unfortunately even going to a cdi won't get you away from the "Cap". Grit your teeth hard and click the add to cart or buy it now. Lets all hope they last along time. I've tuned up a lot of old Merc's and I if memory servers I've never changed a cap. Lots of plug wires and plugs. That motor probably has a Mag in front of the cap.

Maybe Hewes can find one....... I saw an awful lot of them and no one is giving them away....... [sad]
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Re: Looking for a distributor cap

Post by GoingtoFish » Wed Jul 27, 2016 12:22 pm

hewesfisher wrote:I may be able to help source the part, but need to confirm year of engine, engine serial number would be most helpful.
I'll look up the serial number when I get home from work.

Eric the boat guy
Petty Officer
Posts: 21
Joined: Tue Jan 29, 2013 8:24 pm

Re: Looking for a distributor cap

Post by Eric the boat guy » Sun Jul 31, 2016 7:46 am

That a hard one to find if availability is there. Used to have a pile of them from stripped motors in the past and haven't needed one for years. I'll check my bosses stash. Also be aware that those motors were notorious for burning the center cylinder up because it only has two carbs. There was a reason why they dropped that design after a few years because of a lean condition. Make sure to do a compression test!
If it ant broke don't fix it, otherwise pay the guy to do it right!

User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Re: Looking for a distributor cap

Post by GoingtoFish » Mon Aug 01, 2016 10:36 am

Eric the boat guy wrote:That a hard one to find if availability is there. Used to have a pile of them from stripped motors in the past and haven't needed one for years. I'll check my bosses stash. Also be aware that those motors were notorious for burning the center cylinder up because it only has two carbs. There was a reason why they dropped that design after a few years because of a lean condition. Make sure to do a compression test!

Thanks for the info!

User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Re: Looking for a distributor cap

Post by GoingtoFish » Mon Aug 01, 2016 10:37 am

GoingtoFish wrote:
hewesfisher wrote:I may be able to help source the part, but need to confirm year of engine, engine serial number would be most helpful.
I'll look up the serial number when I get home from work.
Finally got the serial # (I think) 345-6352

User avatar
hewesfisher
Admiral
Posts: 1886
Joined: Sat Apr 28, 2007 8:20 am
Location: Spangle, WA

Re: Looking for a distributor cap

Post by hewesfisher » Tue Aug 02, 2016 6:45 pm

Will see what I can do...
Phil

'09 Hewescraft 20' ProV
150hp Merc Optimax
8hp Merc 4-stroke
Raymarine DS600X HD Sounder
Raymarine a78 MultiFunctionDisplay
Raymarine DownVision
Raymarine SideVision
Baystar Hydraulic Steering
Trollmaster Pro II
Traxstech Fishing System
MotorGuide 75# Thrust Wireless Bow Mount

User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Re: Looking for a distributor cap

Post by GoingtoFish » Wed Aug 03, 2016 11:59 am

hewesfisher wrote:Will see what I can do...
Thanks Hewesfisher!

User avatar
hewesfisher
Admiral
Posts: 1886
Joined: Sat Apr 28, 2007 8:20 am
Location: Spangle, WA

Re: Looking for a distributor cap

Post by hewesfisher » Thu Aug 04, 2016 6:37 am

From my source, and based on the information you provided, these are current inventories of the distributor cap you need:

Quantity Dealership City State Phone Number Last Updated
1 BOATERS WORLD MAR CT LAKE PLACID FL 863-465-6669 07/27/2016
1 KEZAR LAKE MARINA LOVELL ME 207-925-3000 07/06/2016
1 VIKING MARINE SPRUCE MI 989-727-2797 06/06/2016
1 BURT GOODNOUGHS MAR SANDY CREEK NY 315-387-5894 06/04/2016
2 DANDY HAVEN MARINA HAMPTON VA 757-851-1573 04/18/2016
1 STANDER MARINE INC LELAND MI 231-256-9231 04/08/2016
1 POWERHOUSE MARINE LA CROSSE WI 608-784-9580 04/06/2016
1 FAYS MARINA LA PORTE IN 866-491-1126 12/20/2015
1 PIPERS MARINE INC TAMPA FL 813-886-0967 11/19/2015

1 BILLS OB MOTOR SERV HINGHAM MA 781-749-1303 03/31/2015
1 MARITA SEA & SKI ANCHORAGE AK 907-337-2744 03/23/2015
1 GOLDSBOROUGHS OB MAR CRISFIELD MD 410-968-0852 02/02/2015
1 BRYANS MARINE VIDALIA LA 318-336-9009 11/01/2013
1 DONS MARINE CENTER WATERBURY CT 203-754-7128 06/06/2013
2 MARINELAND OF WACO WACO TX 254-662-0676 12/03/2012
1 CLARK BOAT & MOTOR EAST ALTON IL 618-259-8712 08/23/2012
3 US BOAT WORKS INC KANSAS CITY KS 913-342-0011 03/28/2011

Best I can do to help. Wouldn't trust any source not updated this year, but who knows, might be a forgotten dusty box sitting on a shelf in a back room. Good luck! [thumbup]
Phil

'09 Hewescraft 20' ProV
150hp Merc Optimax
8hp Merc 4-stroke
Raymarine DS600X HD Sounder
Raymarine a78 MultiFunctionDisplay
Raymarine DownVision
Raymarine SideVision
Baystar Hydraulic Steering
Trollmaster Pro II
Traxstech Fishing System
MotorGuide 75# Thrust Wireless Bow Mount

User avatar
GoingtoFish
Warrant Officer
Posts: 102
Joined: Mon Nov 03, 2008 3:38 pm
Location: Redmond, WA.

Re: Looking for a distributor cap

Post by GoingtoFish » Thu Aug 04, 2016 11:02 am

Thanks again Hewesfisher! I'll look into some of these and see what I can find.

User avatar
Larry3215
Admiral
Posts: 1870
Joined: Thu Aug 02, 2012 7:02 pm

Re: Looking for a distributor cap

Post by Larry3215 » Thu Aug 04, 2016 11:49 am

Have you checked with some of the used outboard guys around? Its been a few years, but here are some I used to deal with.

Hollywood boat parts in Tacoma 253-475-9246

Jacks Used outboards - Puyallup maybe? 253-474-0607

There were at least two others that I know went out of business. You might try googling used outboards or parts and see what pops up.

Post Reply