Trolling Motor Kicker Real deal Full power at the helm

[swedefish4life1]

[clam man]

Swede,

I have to follow you around one day for salmon. Nice setup on the motor...

[swedefish4life1]

Make it this summer:-$ I do belive in miracles and dreams for others:cheers:

God bless you all one more look tomorrow about 7pm with the white coats :batman:
Just a simple Prayer or Heck yes for a ex fighter/fisher outdoorsman who dreamed big to finish I have fought the good fight 5 years its been a load and I never took the chair as they asked and begged I took the seas, rivers and chances I am the Swede Viking Warrior 1 until my last cast or dance.

Help a kid, open a door for a elder, talk to a Vet I asked to much of my bod Type A ya think!lol

All you young guys you be the man Just take the time to smell the roses Trust me

Tight Lines Fish ON!

[wolverine]

Hang in there Swede. You've made it five, now lets go for 10!!!

[swedefish4life1]

Thanks Big W:cheers: You be the man and punish them with pride on the puffer stick
Going in eyes wide open:cyclopsan
Fish On!

[Rich McVey]

Ok Swede, now your just teasing me.

My kicker mount looks like its the original with the boat. 1978. It barely holds a trolling motor much less a real motor. Another thing to add to the upgrade list.

So you ride too eh... sweet. I love hitting the road on sunny Saturday mornings before anyone else gets up. Rolling 1:1, just me and the world. Very peacefull!

You gonna be at the WaLakes Bass/Trout on Apr 23?

[mav186]

Nice post Swede...here's how mine is rigged as well....

Mav

[swedefish4life1]

Now the Bonics Class starts:cyclopsan

Metal tubs zero brackets#-o = the kicker Pocket is part of the Custom#-o Build:cheers: and rear Transom and includes a warm water hand wash sink and full spray down system for Fish and kid Clean ups:cyclopsan and water wars!:colors: :bounce:

Or bikini Clean ups I hate sand!:thumright =d>

The kicker motor and area is part of the tub and moving process not a bolt on or bracket build and goes into the Custom#-o
Design of the build like the downrigger mounts in the build not after integrity the strength and gains this flatten's bolt on's each and all.

With the custom Colors and materials used on areas you touch, walk and bleed on a simple wash down to finish the game before your even home or bank side.

Better then Rhino Gaurd but similar with some grit into the process and I had a few metal tubs that had diamond plate floors they looked sweet but cooked you in the summer on grabbing reflexion alone from the sunlight and after 32 degrees in the winter it becomes a ice skating rink!

Fish boxes the same in the build and process =Coolers are for food and beverages mine is massive salt or fresh water fills depends on the waters your in you want salt or fresh a simple turn your in!
Plus with a aireator in the fish tank and box you drop your fish in bright it comes out chrome and alive instead of sitting on just ice.

Really Sweet on live bait as well and gives you the options:-$


Pull out bait cutting board area as well right in the workbench zone makes things faster more productive and more hook ups as your gear is in the water more not looking for a loose cutting board in a moving tub!

Built in tackle boxes into the tub not rocket launchers when you hit bigger waters and with lots of front seats on big boxes mucho grande storage areas for soft bags or plastic tackle boxes as well.
Forced air heat at the helm and custom seat warmers for the Brave souls up front:brilsmurf :bigsmurf:

First thing I do when I see a tub new or used is make it a working vision for doing and the 1st thing I tell most befoe I bonics:viking: a tub is install Rear deck lights for early morning starts , making Glow gear Glow more and providing a clear vision of the entire workbench in the rear of the tub in the bang zone for safety and more and faster hook ups!

Like screw drivers , guns and much more a tub is a tool for either sport fishing, camping, sharing water sports , enjoying and getting away and almost every tub down to a Canoe can be set up to do more, be more productive and to catch more fish if the trail is from understanding design, length, width, HP and much more from doing and seeing the vision that most miss, dont care or never had the tools to understand the basic process of a boat in working motion in almost every case there is a correct answer and not just mine many understand the process most don't and do not care.

All the correct answers and choices if its yours and the reflexion from education and learning sets as all free.:study:

Tight Lines fish ON!

[mav186]

Very nice set-up Swede...I had the welded downrigger mounts added to the rail system and a 50" transom aerated livewell, with plenty of pump, for the critters. Warm water to come next year. Thanks for the pics/ideas. Nothing like a well designed user friendly fishing platform!
Mav