Cascade River

A place for readers to talk about river fishing in Washington.
Forum rules
Forum Post Guidelines: This Forum is rated “Family Friendly”. Civil discussions are encouraged and welcomed. Name calling, negative, harassing, or threatening comments will be removed and may result in suspension or IP Ban without notice. Please refer to the Terms of Service and Forum Guidelines post for more information. Thank you
User avatar
natetreat
Rear Admiral One Star
Posts: 3653
Joined: Sun May 23, 2010 10:11 pm
Location: Lynnwood

Re: Cascade River

Post by natetreat » Thu Dec 06, 2012 11:57 pm

They haven't even posted a escapement count on the hatchery yet. I'll tell you what's going to happen, folks are going to get tired of driving out there for two hours, only to get skunked next to 20 other folks who got skunked, and two guides that limit out, and make the short trip out to reiter instead. Then the fish are going to know that it's safe to come back and get caught by us, when everyone else gives up. I'll put money on it.

User avatar
fear_no_fish
Captain
Posts: 718
Joined: Sun Aug 16, 2009 12:10 pm
Location: Lake stevens

Re: Cascade River

Post by fear_no_fish » Fri Dec 07, 2012 12:01 am

natetreat wrote:Then the fish are going to know that it's safe to come back and get caught by us, when everyone else gives up. I'll put money on it.
I like how you think [thumbup]

KingSlayer
Petty Officer
Posts: 14
Joined: Tue Nov 27, 2012 7:09 pm
Location: Everett, Wa

Re: Cascade River

Post by KingSlayer » Fri Dec 07, 2012 12:31 am

Me and a buddy are headed up tomorrow morning for some steel. River looks good, I'm all set up, besides weight. How much are y'all using? On drift set up with shrimp and jig
2012 Season Stats


Kings - 110
Silvers - 10
Chum - 0
Steelies - 0
Trout - 39

User avatar
Brat Bonker
Admiral
Posts: 1851
Joined: Mon May 28, 2012 11:37 am
Location: Notellem River, Wa

Re: Cascade River

Post by Brat Bonker » Fri Dec 07, 2012 7:02 am

I use 5-7 ball .300 shot slinkies on the cascade but that is just for a certain hole that I fish.
Let me guess does the secret cure include borax... 8-[

rcthepirate
Lieutenant
Posts: 202
Joined: Sun Jan 29, 2012 3:01 pm
Location: Bothell, WA

Re: Cascade River

Post by rcthepirate » Fri Dec 07, 2012 7:36 am

KingSlayer wrote:Me and a buddy are headed up tomorrow morning for some steel. River looks good, I'm all set up, besides weight. How much are y'all using? On drift set up with shrimp and jig
If you are drift fishing you should pretty much be tuning your lead for every different hole that you fish so that you are getting the correct presentation. When you get there, start out pitching an inch of pencil lead. If you are touching every rock on the way down/getting snagged up every cast, lighten it up. If you are having a hard time maintaining contact with the bottom, cut a bigger one.

KingSlayer
Petty Officer
Posts: 14
Joined: Tue Nov 27, 2012 7:09 pm
Location: Everett, Wa

Re: Cascade River

Post by KingSlayer » Fri Dec 07, 2012 8:37 am

I've never used pencil lead, only split shots and tear drop weights. Honestly I wouldn't know the first thing about pencil lead haha. Does it make a difference in the drift? How much contact do I want with the bottom. I'm running a 2 ft leader so I won't want to much weight cause then my bobber is gonna be underwater lol.
2012 Season Stats


Kings - 110
Silvers - 10
Chum - 0
Steelies - 0
Trout - 39

User avatar
Brat Bonker
Admiral
Posts: 1851
Joined: Mon May 28, 2012 11:37 am
Location: Notellem River, Wa

Re: Cascade River

Post by Brat Bonker » Fri Dec 07, 2012 8:59 am

don't use a bobber for drift fishing just a 3-4ft leader corky yarn and a slinky is good there since it is rocky and snaggy or just use jigs.

3footvis
Warrant Officer
Posts: 191
Joined: Tue Dec 06, 2011 10:09 am

Re: Cascade River

Post by 3footvis » Fri Dec 07, 2012 9:21 am

KingSlayer wrote:I've never used pencil lead, only split shots and tear drop weights. Honestly I wouldn't know the first thing about pencil lead haha. Does it make a difference in the drift? How much contact do I want with the bottom. I'm running a 2 ft leader so I won't want to much weight cause then my bobber is gonna be underwater lol.
Don't forget the surgical tubing if you use pencil lead, will save you from losing some gear. Sounds like you are bobber doggin? If so, use a bigger bobber. If your float is going underneath the water....you are using too small of a float, are using too much lead, or you have a FISH ON! [thumbsup]

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5407
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Cascade River

Post by Bodofish » Fri Dec 07, 2012 9:24 am

I'm not really sure how one would use pencil lead with a bobber without hopelessly tangling everything.
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
Gringo Pescador
Moderator
Moderator
Posts: 2564
Joined: Wed May 23, 2007 8:35 am

Re: Cascade River

Post by Gringo Pescador » Fri Dec 07, 2012 10:14 am

Bodofish wrote:I'm not really sure how one would use pencil lead with a bobber without hopelessly tangling everything.
That is what I thought as well, I wouldn't rig it, but I've seen it done without issues.
I fish not because I regard fishing as being terribly important, but because I suspect that so many of the other concerns of men are equally unimportant, and not nearly so much fun. ~ John Volker

3footvis
Warrant Officer
Posts: 191
Joined: Tue Dec 06, 2011 10:09 am

Re: Cascade River

Post by 3footvis » Fri Dec 07, 2012 10:41 am

I usually hang up far less when I'm bobber doggin compared to normal drift fishing. Might have to do with how the lead is ticking with the current slightly behind the bobber & also the bobber bounces a little and pulls the lead up a bit.

KingSlayer
Petty Officer
Posts: 14
Joined: Tue Nov 27, 2012 7:09 pm
Location: Everett, Wa

Re: Cascade River

Post by KingSlayer » Fri Dec 07, 2012 10:43 am

Would I just use the slinky weight with no bobber with jig and leader
2012 Season Stats


Kings - 110
Silvers - 10
Chum - 0
Steelies - 0
Trout - 39

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5407
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Cascade River

Post by Bodofish » Fri Dec 07, 2012 10:45 am

No jig, it's used for straight up drift fishing.
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

KingSlayer
Petty Officer
Posts: 14
Joined: Tue Nov 27, 2012 7:09 pm
Location: Everett, Wa

Re: Cascade River

Post by KingSlayer » Fri Dec 07, 2012 10:51 am

Then people have been jerkin me lol. A jig under a float with shrimp is what's good right
2012 Season Stats


Kings - 110
Silvers - 10
Chum - 0
Steelies - 0
Trout - 39

3footvis
Warrant Officer
Posts: 191
Joined: Tue Dec 06, 2011 10:09 am

Re: Cascade River

Post by 3footvis » Fri Dec 07, 2012 10:59 am

Image

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5407
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Cascade River

Post by Bodofish » Fri Dec 07, 2012 11:27 am

KingSlayer wrote:Then people have been jerkin me lol. A jig under a float with shrimp is what's good right

Yep that's a good way. But not the only way, the above drifting setup with various bits on the end also work well in many areas. It begs the eternal question, do yo scratch with the left or right?
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
natetreat
Rear Admiral One Star
Posts: 3653
Joined: Sun May 23, 2010 10:11 pm
Location: Lynnwood

Re: Cascade River

Post by natetreat » Fri Dec 07, 2012 2:11 pm

Gringo Pescador wrote:
Bodofish wrote:I'm not really sure how one would use pencil lead with a bobber without hopelessly tangling everything.
That is what I thought as well, I wouldn't rig it, but I've seen it done without issues.
That's how I do it, and I don't get tangles. As long as you point the snap toward your leader, it doesn't tangle. It's especially helpful when using dink floats, because they don't have a specified weight rating, so you can pinch it off until it is perfect.

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5407
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Cascade River

Post by Bodofish » Fri Dec 07, 2012 2:18 pm

I just use an egg sinker to get it close then add splitshot....... they're going on and coming off all day long.
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
RiverChromeGS
Sponsor
Sponsor
Posts: 2460
Joined: Mon Dec 27, 2010 9:29 pm
Location: Bellingham, WA
Contact:

Re: Cascade River

Post by RiverChromeGS » Fri Dec 07, 2012 2:26 pm

Metal wrote:Freak if its only males showing up be patient. Their always the first to show up in the run. You know the run has peaked if you're getting all females.
Seriously, and im not just saying this to be negative.. WAY more hens than bucks for me, go look at my pics from there mostly 2-3 salt hens. So its not all bucks, and honestly ive fished cascade for a while and they have ALWAYS shown up before december, either record late timing or not coming. Who knows something might have happened to one years smoly release cause theres big 2-3 salts but the one year fish are basically non existant
http://www.riverchromeguideservice.com

River Chrome Guide Service specializes in salmon and steelhead fishing in Puget Sound and The Olympic Peninsula

Official WashingtonLakes.com Sponsor

User avatar
Brat Bonker
Admiral
Posts: 1851
Joined: Mon May 28, 2012 11:37 am
Location: Notellem River, Wa

Re: Cascade River

Post by Brat Bonker » Fri Dec 07, 2012 3:19 pm

float/jig-float, split shot, swivel, jig
drift fishing-slinky, swivel, leader, corky, hook, yarn
I do not know where you found a drift rig with a jig but it is wrong

Hey how are the people fishing concrete and rockport on the skagit doing maybe they are stacking up down there for right now or something.

Post Reply